The E-60 Series entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to provide two-way handsfree communication. The E-60's compact size allows it to be mounted in a standard double gang electrical box. The E-60 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-60 faceplates (PNL60) can be purchased separately and are available in all five standard finishes. The E-60’s blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming ring.
The E-60 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200 or C-2000A Entry Phone controller. The E-60 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 auto dialer. The E-60 features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For extreme outdoor environments or corrosive atmospheres, the E-60 Series is available with Enhanced Weather Protection (EWP).
Applications
* Door or gate communication, business delivery entrances
* Use with a Viking C-200 to control one E-60 on a single phone line
* Use with a Viking C-2000A to control 1 to 4 E-60’s and door/gate control on a single phone line
* Provide unique front and back door chimes and paging when used with a Viking SLP-1 and C-2000A
* Residential, commercial and industrial door security
* Use with a Viking K-1900-5 for automatic speed dialing on tele- phone lines or analog PABX/KSU station ports
* Use on any analog PABX station port with programmable ringdown capability
Features
* Compact size: Front panel is the size of a typical double gang mid- size wall plate
* Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.7” wide x 2.84” tall minimum) or surface mounts in a Viking model VE-5x5 (not included, see DOD# 424)
* Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
* PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes
* Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-60-SS Stainless Steel faceplate)
* Optional Enhanced Weather Protection (EWP) available
* Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws
* Blue LED helps locate the push button, indicate ringing and off-hook
* Telephone line powered
* Microphone and speaker volume controls
* Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
* Selectable auto answer feature for monitoring
* Programmable VOX (mic/speaker) switching speed
Specifications
* Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1A Talk Battery Booster (see Fax Back Document 630).
* Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875” x 4.938” x 0.17”), Phone: 72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”)
* Shipping Weight: 0.45 kg (1.0 lbs)
* Operating Temperature: -34° C to 65° C (-30° F to 150° F)
* Humidity: Standard model: 5% to 95% non-condensing humidity, EWP model: up to 100% humidity
* Speaker Volume: Approximately 62db maximum @ 1m
* Ring Voltage: 25V AC RMS minimum (for auto answer)
* CPC Disconnect Time: 300ms minimum
* REN: 0.8A
* Connections: (2) gel-filled butt connectors
