2' x 2' LAY-IN CEILING SPEAKER MODEL V-9022A-2 (2-Pack)
FEATURES:
EXCELLENT VOICE AND MUSIC REPRODUCTION
1 WATT AMPLIFIER BUILT-IN
AESTHETICALLY PLEASING WHITE GRILLE
BAKED ENAMEL FINISH
INTEGRAL PLENUM RATED BACKBOX MEETS OR
EXCEEDS ASTM E84 FLAME & SMOKE TEST
REPLACES A 2' x 2' or 1/2 OF A 2' x 4' CEILING TILE
FOUR SEISMIC TABS PROVIDED FOR ADDITIONAL MOUNTING INTEGRITY
DESCRIPTION: 8" Speaker assembly with speaker, amplifier and volume control mounted in 2' x 2' grille with integral backbox.
SPEAKER
8” (20.32 cm) Speaker
OUTPUT
Rating: > 96 dB @ 4'
Signal/noise ratio: -70 dB
FREQUENCY RESPONSE
80 Hz to 15 kHz
POWER REQUIREMENT
50 Ma @ 24 Vdc
HOUSING AND FINISH
Steel housing with a white baked on acrylic
enamel finish
ENVIRONMENT
Temperature: 32 to 122 °F (0 to 50 °C)
Humidity: 0 to 85% Non-Precipitating
DIMENSIONS AND WEIGHT
24.0” (60.96 cm) L x 24.0” (60.96 cm) W x
3.75" D (9.53 cm)
Weight: 5.5 lbs. (2.49 kg)
The Valcom LAY IN ceiling speakers are paging speakers / background music speakers that are intended to replace a ceiling tile and lay in the ceiling tile track.
This means you do not have to cut any ceiling tiles for a no mess installation.
Valcom makes these lay in speakers in a variety of flavors.
- Valcom V-9022 2'x 2' One-Way Lay In Ceiling Speaker (-1 VPU).
ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS MODEL V-9022
2' x 2' LAY-IN CEILING SPEAKER
The V-9022 Lay-in Ceiling Speakers shall consist of a white two foot by two foot perforated grille, a speaker and
integral backbox. The volume control is accessible through the perforated grille.
The speaker for the V-9022 shall be 8" (20.32 cm) in diameter and have a 5 oz. (142 g) ceramic magnet. The 8"
speaker cone material shall be paper. The speaker impedance shall be 45 ohms. The diameter of the voice coil shall be
.75" (1.91 cm) diameter. Operating temperature shall be +32 to +122 °F (0 to +50 °C).
The One-Way, Model V-9022, shall include an amplifier assembly and volume control. Distortion shall be less than
1.5% at rated output of 1 watt RMS. Signal to noise ratio shall be -70dB. The amplifier shall operate on a -24Vdc nominal,
positive ground power supply. Operating current shall be 50mA at -24 Vdc.
The baffle shall be constructed with a single piece of perforated steel with a white baked on acrylic enamel finish.
The backbox meets or exceeds A.S.T.M. E84 flame and smoke test and has a three hour burn rating (UL181). Four seismic
tabs provided for additional mounting integrity.
Maximum dimensions of the grill shall be: Baffle 2' L x 2' W x 3.75" D (60.96 cm x 60.96 cm x 9.53 cm). Weight
shall be approximately 5.5 lbs (2.49 kg).
