30-WATT AMPLIFIED HORN MODEL V-1038 FEATURES:
INDOOR/OUTDOOR USE
BUILT-IN 30 WATT AMPLIFIER MODULE
HIGH IMPACT ABS HOUSING
BUILT-IN VOLUME CONTROL
OMNI-DIRECTIONAL MOUNTING BASE
WALL OR ELECTRICAL BOX MOUNT
OPERATES ON -48 VDC POWER SUPPLY
I-BEAM CLAMP INCLUDED
DESCRIPTION: The V-1038 is a weather resistant, reentrant 30 watt amplified horn speaker, complete with 30 watt amplifier, volume control, horn housing, mounting base and I-beam clamp. SOUND PRESSURE LEVELS 125 dB measured at 4' (1.22 m) on axis with a -10 dBm input at 1 kHz. FREQUENCY RESPONSE 225 Hz to 14 kHz DISPERSION 120° Horizontal and 90° Vertical AMPLIFIER MODULE Rated Output: 30 Watts RMS Output Load: 8 Ohms Input Impedance: 600 Ohms nominal Distortion: less than 2% (1 kHz at rated output) Power Supply: -48 Vdc nominal, positive ground Operating Current: 1 Amp @ -48 Vdc MOUNTING Omni-Directional mounting fully adjustable, 360° horizontal and 160° vertical. Detachable base for wall or electrical box mounting with I-beam clamp included. HOUSING AND FINISH The horn is made of high impact ABS plastic.
The mounting base is constructed of ultra high impact LEXAN® plastic. ENVIRONMENT Temperature: -4 to +131 °F ( -20 to +55 °C) Humidity: 0-95% Non-Condensing DIMENSIONS AND WEIGHT 7.38; H x 10.00 W x 10.40 (18.75 cm x 25.40 cm x 26.42 cm) Weight: 5.8 lbs (2.63 kg.)
- Valcom V-1038 30 Watt Horn.
- For use in High Noise Environments.
- Stainless Steel Hardware
- Built-In Amplifier.
- Volume Control Included.
- VC-VP-2048 Special purpose 48VDC power supply. 2 Amp filtered.Provides power for up to 2 V-1038 30-Watt Horns.
Keywords: v-1038,v1038,valcom,valcom paging horn,30 watt.
ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS MODEL V-1038 30 WATT AMPLIFIED HORN The 30-Watt Amplified Horn, Model V-1038, shall be weather-resistant, high efficiency reentrant type horn with high frequency diffuser. It shall be equipped with an amplifier, externally accessible volume control. It shall include a detachable base for wall or single, double or octagon electrical box mounting and omni-directional ball joint mounting bracket to allow precise positioning in the vertical and horizontal planes with a single adjustment. An I-beam mounting clamp shall also be provided. The frequency response shall by 225 Hz to 14 kHz. Dispersion shall be 120 horizontal and 90° vertical. Sound pressure level shall be 125 dB measured at 4 feet (1.22 m) on axis with an input to the amplifier module being -10 dBm at 1 kHz. Distortion shall be less than 2.0% at rated output of 30 watts RMS. Output load shall be 8 ohms. Input impedance shall be 600 ohms nominal. The amplifier shall operate on a -48 Vdc nominal, positive ground power supply. Operating current shall be 1 Amp at -48 Vdc. Operating temperature shall be -4 to +131 °F (-20 to 55 °C). Operating humidity shall be 0-95% noncondensing. The horn shall be constructed of high impact ABS plastic. The mounting base shall be constructed of LEXAN® an ultra high impact material which is stronger and tougher than die casting. The finish shall be beige with brown accent. The I-beam mounting clamp shall be constructed of zinc chromate plated steel. Dimensions of the horn shall be 7.38" (18.75 cm) H x 10.0" (25.40 cm) W x 10.4" (26.42 cm) D. Shipping weight shall be approximately 5.8 lbs (2.63 kg). LEXAN® Registered Trademark of General Electric Co.
