FEATURES:
INDOOR/OUTDOOR USE
BUILT-IN 15 WATT AMPLIFIER MODULE
HIGH IMPACT ABS HOUSING
BUILT-IN VOLUME CONTROL
OMNI-DIRECTIONAL MOUNTING BASE
WALL OR ELECTRICAL BOX MOUNT
OPERATES ON -24 VDC POWER SUPPLY
I-BEAM CLAMP INCLUDED
DESCRIPTION: The V-1036C is a weather resistant, reentrant, 15 watt amplified, horn speaker, complete with 15 watt amplifier, volume control, horn housing, mounting base and I-beam clamp.
SOUND PRESSURE LEVELS
121 dB measured at 4' (1.22 m) on axis with a 10
dBm input at 1 kHz.
FREQUENCY RESPONSE
225 Hz to 14 kHz
DISPERSION
120° Horizontal and 90° Vertical
AMPLIFIER MODULE
Rated Output: 15 Watts RMS
Output Load: 8 Ohms
Input Impedance: 600 ohms nominal
Power Supply: -24 Vdc nominal, positive ground
Operating Current: 900 mA at -24 VDC
MOUNTING
Omni-Directional mounting fully adjustable,
360° horizontal and 160° vertical. Detachable
base for wall or electrical box mounting with Ibeam
clamp included.
HOUSING AND FINISH
The horn is made of high impact ABS plastic. The
mounting base is constructed of ultra high impact
LEXAN® plastic. The V-1036C available in beige
and gray. The V-1036M is white.
ENVIRONMENT
Temperature: -4 to +131 °F (-20 to +55 °C)
Humidity: -0-95% Non-Condensing
DIMENSIONS AND WEIGHT
7.38” (18.75 cm) H x 10.0” (25.40 cm) W x 10.5”
(26.67 cm) D
Weight: 4.7 lbs (2.2 kg.)
ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS
MODEL V-1036C, V-1036M 15 WATT AMPLIFIED HORN
The 15-Watt Amplified Horn, Model V-1036C, shall be an FCC registered, weather-resistant, high efficiency reentrant type horn
with high frequency diffuser. It shall be equipped with an amplifier, externally accessible volume control. It shall include a
detachable base for wall or single, double or octagon electrical box mounting and omni-directional ball joint mounting bracket to
allow precise positioning in the vertical and horizontal planes with a single adjustment. An I-beam mounting clamp shall also be
provided. The FCC registration number shall be BAFUSA-69358-KX-N.
The frequency response shall by 225 Hz to 14 kHz. Dispersion shall be 120 horizontal and 90° vertical. Sound pressure level
shall be 121 dB measured at 4 feet (1.22 m) on axis with an input to the amplifier module being -10 dBm at 1 kHz. Distortion
shall be less than 2.0% at rated output of 15 watts RMS. Output load shall be 8 ohms. Input impedance shall be 600 ohms
nominal. The amplifier shall operate on a -24 Vdc nominal, positive ground power supply. Operating current shall be 900 mA at
-24 Vdc. Operating temperature shall be -4 to 131 °F (-20 to 55 °C). Operating humidity shall be 0-95% noncondensing.
The horn shall be constructed of high impact ABS plastic. The mounting base shall be constructed of LEXAN® an ultra high
impact material which is stronger and tougher than die casting. The finish shall be beige with brown accent. The I-beam
mounting clamp shall be constructed of zinc chromate plated steel.
Dimensions of the horn shall be 7.38" (18.75 cm) H x 10.0" (25.40 cm) W x 10.5" (26.67 cm) D. Shipping weight shall be
approximately 4.7 lbs (2.2 kg).
LEXAN® Registered Trademark of General Electric Co.
- Valcom V-1036C and V-1036M One-Way Paging Horns.
- Built-In 15 Watt Amplifier Module.
- Built-In Volume Control.
- Wall / Electrical Box Mount.
- High Impact ABS Housing.
- Easy Omni-Lock I-Beam Clamp Mounting System (I-Beam Included).
- Mount Base Before Construction is Done.
- Moveable (360 Degrees Rotation) - Most other horns are moveable up and down.
- Shatter-Proof Base Fits Seven Standard Electrical Gang Boxes.
- Weather-Resistant.
- Stainless Steel Hardware.
- For Indoor/Outdoor Use.
- Valcom V-1036C 15 Watt (-18 VPU), One-Way Paging Horn.(Beige or Gray)
- Resist Deteriorating of Salt, Sun and High Humidity.
- Equipped with O-Ring Seals.
- Operates on -24 VDC Power Supply.
Keywords: v-1036c,v-1036m,v-1036,v1036,v1036m,v1036c,valcom,valcom paging horn,15 watt
