FEATURES:
INDOOR/OUTDOOR USE
BUILT-IN 5 WATT AMPLIFIER MODULE
HIGH IMPACT ABS HOUSING
BUILT-IN VOLUME CONTROL
OMNI-DIRECTIONAL MOUNTING BASE
WALL OR ELECTRICAL BOX MOUNT
OPERATES ON -24 VDC POWER SUPPLY
I-BEAM CLAMP INCLUDED
The V-1030C is a weather resistant, reentrant, 5 watt amplified horn speaker, complete with 5 watt amplifier, volume control, horn housing, mounting base and I-beam clamp.
SOUND PRESSURE LEVELS
116 dB measured at 4' (1.22 m) on axis with
a -10dBm input at 1 kHz
FREQUENCY RESPONSE
225 Hz to 14 kHz
DISPERSION
120° Horizontal and 90° Vertical
AMPLIFIER MODULE
Rated Output: 5 Watts RMS
Output Load: 8 Ohms
Input Impedance: 600 Ohms (1 kHz at rated output)
Power Supply: -24 Vdc nominal, positive ground
Operating Current: 300 mA at -24 Vdc
MOUNTING
Omni-Directional mounting fully adjustable,
360° horizontal and 160° vertical. Detachable
base for wall or electrical box mounting with Ibeam
clamp included.
HOUSING AND FINISH
The horn is made of high impact ABS plastic.
The mounting base is constructed of ultra high
impact LEXAN® plastic.
DIMENSIONS AND WEIGHT
7.38” (18.75 cm) H x 10.0” (25.4 cm) W x 10.50”
(26.67 cm) D
Weight: 4.75 lbs (2.2 kg.)
ENVIRONMENT
Temperature: -20 to +55 °C (-4 to +131 °F)
Humidity: -0-95% Non-Condensing
ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS
MODEL V-1030C, V-1030M 5 WATT AMPLIFIED HORN
The 5-Watt Amplified Horn, Model V-1030C, shall be an FCC registered, weather-resistant, high efficiency reentrant
type horn with high frequency diffuser. It shall be equipped with an amplifier, externally accessible volume control. It shall
include a detachable base for wall or single, double or octagon electrical box mounting and omni-directional ball joint mounting
bracket to allow precise positioning in the vertical and horizontal planes with a single adjustment. An I-beam mounting clamp
shall also be provided. The FCC registration number shall be BAFUSA-69358-KX-N.
The frequency response shall by 225 Hz to 14 kHz. Dispersion shall be 120 horizontal and 90° vertical. Sound
pressure level shall be 116 dB measured at 4 feet (1.22 m) on axis with an input to the amplifier module being -10 dBm at 1 kHz.
Distortion shall be less than 2.05 at rated output of 5 watts RMS. Output load shall be 8 ohms. Input impedance shall be 600
ohms nominal. The amplifier shall operate on a -24 Vdc nominal, positive ground power supply. Operating current shall be 300
mA at -24 Vdc. Operating temperature shall be -4 to 131 °F (-20 to 55 °C). Operating humidity shall be 0-95% noncondensing.
The horn shall be constructed of high impact ABS plastic. The mounting base shall be constructed of LEXAN® an ultra
high impact material which is stronger and tougher than die casting. The finish shall be beige with brown accent. The I-beam
mounting clamp shall be constructed of zinc chromate plated steel.
Dimensions of the horn shall be 7.38" (18.75 cm) H x 10.0" (25.40 cm) W x 10.5" (26.67 cm) D. Shipping weight shall
be approximately 4.75 lbs (2.2 kg).
LEXAN® Registered Trademark of General Electric Co.
- Valcom V-1030C and V-1030M One-Way Paging Horns.
- Built-In 5 Watt Amplifier Module.
- Built-In Volume Control.
- High Impact ABS Housing.
- Wall / Electrical Box Mount.
- Easy Omni-Lock I-Beam Clamp Mounting System (I-Beam Included).
- Mount Base Before Construction is Done.
- Moveable (360 Degrees Rotation) - Most other horns are moveable up and down.
- Shatter-Proof Base Fits Seven Standard Electrical Gang Boxes.
- Weather-Resistant.
- Stainless Steel Hardware.
- For Indoor/Outdoor Use.
- Valcom V-1030C 5 Watt (-6 VPU), One-Way Paging Horn. (Beige or Gray)
- Valcom V-1030M Marine 5 Watt (-6 VPU) One-Way Paging Horn. (White)
- Resist Deteriorating of Salt, Sun and High Humidity.
- Equipped with O-Ring Seals.
- Operates on -24 VDC Power Supply
Keywords: V-1030c, V-1030M,V1030C,V1030M,1030C,1030M,1030,paging horn,valcom
