Tripp Lite TE600 Line Interactive UPS with voltage regulation

Tripp Lite's TE600 UPS System provides line-interactive voltage regulation and long lasting battery support for small business telephone systems, voicemail systems, personal computers and other communications, network and telecom applications. 600VA power handling capacity and large capacity battery system maintains continuous operation through power interruptions with over 1 hour runtime for many phone systems. Line interactive voltage regulation maintains normal 120 volt output levels during brownouts as low as 75 and overvoltages as high as 147, saving battery reserves for use only during complete power failures. Unique design features 6 protected outlets (3 UPS supported & 3 surge-suppression only), diagnostic LEDs and a built-in serial port that works with PowerAlert Software and cabling to provide automatic unattended shutdown of network and PC applications (part# 75-0195). $200,000 Ultimate Lifetime Insurance (USA & Canada Only).
Key Features

* Provides connected equipment with continuous power during short and long duration loss of commercial power
* Line-interactive voltage regulation corrects brownouts and overvoltages from 75 to 147 volts back to usable 120V output levels, without using battery power
* Supports loads up to 600VA/425 watts
* 22 minutes half load runtime (300VA/210 watts), 7 minutes full load runtime (600VA/425 watts)
* 6 protected outlets total (3 UPS Supported & 3 surge-suppression only); 6-ft. cord
* DB9 serial network interface
* Complete surge protection and EMI/RFI noise filtering
* $200,000 Ultimate Lifetime Insurance (USA & Canada Only) — 2 year product warranty — No warranty cards required for coverage!
* 4 diagnostic LEDs indicate AC present, on battery, voltage correction & battery low/replace
* Battery replacement door

Package Includes

* TE600 UPS System
* Warranty information
* Instruction manual

OUTPUT
Output Volt Amp Capacity (VA) 600
Output Watt Capacity (watts) 425
Nominal Output Voltage(s) Supported 115v; 120v
Frequency compatibility 60 Hz
Output voltage regulation (line mode) -18%, +8%
Output voltage regulation (Battery mode) 115V (+/- 5%)
Built-in UPS output receptacles 6 5-15R outlet(s)
Surge suppression only outlets 3 UPS outlets, 3 surge-only outlets
Output AC waveform (AC mode) Sine wave
Output AC waveform (battery mode) PWM sine wave
INPUT
Rated input current (at maximum load) 12A
Nominal Input Voltage(s) Supported 120V AC
UPS input connection type 5-15P; Space saving right angled input plug
UPS Input cord length (ft.) 6
UPS Input cord length (m) 1.8
Recommended Electrical Service 15A 120V
BATTERY
Full load runtime (minutes) 9 min. (600w)
Half load runtime (minutes) 22 min. (300w)
DC system voltage 12V DC
Battery recharge rate (included batteries) Less than 6 hours from 10% to 90%
Replacement battery cartridge (internal UPS battery replacement) RBC52 (quantity 2)
Battery Access Battery access door
VOLTAGE REGULATION
Voltage regulation description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
Overvoltage correction Input voltages between 128 and 147 are reduced by 12%
Undervoltage correction Input voltages between 93 and 107 are boosted by 14%
Severe undervoltage correction Input voltages between 75 and 92 are boosted by 30%
LEDS ALARMS & SWITCHES
LED Indicators 4 LEDs indicate line power, battery power, overload and battery low/replace status
Alarms Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating 480
UPS AC suppression response time Instantaneous
EMI / RFI AC noise suppression Yes
PHYSICAL
Installation form factors supported with included accessories Tower
Installation form factors supported with optional accessories Wallmount (use UPSWM - tower mounting kit)
Primary form factor Tower
UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 10.8 x 5.2 x 7.5
UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 27.3 x 13.3 x 19
UPS / Power Module weight (lbs) 19
UPS / Power Module weight (kg) 8.6
UPS Shipping dimensions (height x width x depth / inches) 14 x 8.5 x 11
UPS Shipping dimensions (height x width x depth / cm) 35.6 x 21.6 x 27.9
Shipping weight (lbs) 21
Shipping weight (kg) 9.5
UPS housing material Vinyl
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full load) 92.2
Battery mode BTU / hr. (full load) 125.7
COMMUNICATIONS
Communications interface DB9 Serial
PowerAlert software Free download from www.tripplite.com
LINE / BATTERY TRANSFER
Transfer time 2-4 milliseconds
Low voltage transfer to battery power (setpoint) 75
High voltage transfer to battery power (setpoint) 147
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure) Cold-start operation supported
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI); ROHS (Reduction of Hazardous Substances)
WARRANTY
Product Warranty Period (U.S., Canada & Puerto Rico) 2 years
Connected Equipment Insurance (U.S., Canada & Puerto Rico) $200,000 connected equipment insurance