Tripp Lite's BCPERS450 standby UPS system offers surge suppression and long lasting battery support for personal computers, internetworking equipment and other sensitive electronics. Internal UPS circuits support entry level PC systems for up to 15 minutes during power failures and brownouts so that connected equipment can be shutdown without data loss. Includes 3 UPS supported outlets. USB port with included cable and PowerAlert monitoring software enables safe unattended system shutdown in the case of extended power failure. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Built-in set of 3 front panel LEDs indicate line power, battery power and battery low/replace status. 450VA/280 watt power handling ability supports entry-level PCs, point-of-sale equipment, small business phone systems and audio/video components. Offers 4 minutes battery runtime with a full load of 450VA and 15 minutes with a half load of 225VA. Supports user battery replacement via built-in access panel. 2 year warranty. $100,000connected equipment insurance (USA, Puerto Rico, & Canada only).
Key Features
* BCPERS450 standby UPS system offers UPS battery support to maintain productivity and prevent data loss during blackouts and brownout conditions
* Supports entry level PC systems for up to 15 minutes during severe brownouts and power failures
* Supports a max load of 450VA/280 watts for 4 minutes
* Supports a half load of 225VA/140 watts for 15 minutes
* Supplies battery derived AC output during brownouts starting at 99 volts
* Attractive small footprint gray tower configuration
* USB port, PowerAlert software and cabling offer safe unattended shutdown without data loss during extended outages
* Includes 3 battery supported NEMA 5-15R outlets, 6 foot AC line cord with NEMA 5-15P input connection
* 3 front panel LEDs indicate line power, battery power and battery low/replace status
* 450VA/280 watt power handling ability supports a variety of computer, internetworking, telecom and consumer electronics equipment
* Supports user battery replacement via built-in access panel
* Compatible with 120V/60Hz applications in USA, Canada, Mexico and more
* 2 year manufacturers warranty
* $100,000connected equipment insurance (USA, Puerto Rico, & Canada only)
Package Includes
* BCPERS450 UPS System
* Warranty information
* Instruction manual
OUTPUT
Output Volt Amp Capacity (VA) 450
Output Watt Capacity (watts) 280
Nominal Output Voltage(s) Supported 115v; 120v
Frequency compatibility 60 Hz
Output voltage regulation (Battery mode) 115V (+/- 5%)
Built-in UPS output receptacles 3 5-15R outlet(s)
Output AC waveform (AC mode) Sine wave
Output AC waveform (battery mode) PWM sine wave
INPUT
Rated input current (at maximum load) 3.1A
Nominal Input Voltage(s) Supported 120V AC
UPS input connection type 5-15P
UPS Input cord length (ft.) 6
UPS Input cord length (m) 1.8
Recommended Electrical Service 15A 120V
BATTERY
Full load runtime (minutes) 4 min. (280w)
Half load runtime (minutes) 15 min. (140w)
DC system voltage 12V DC
Battery recharge rate (included batteries) Less than 3.6 hours from 10% to 90%
Replacement battery cartridge (internal UPS battery replacement) RBC51
Battery Access Battery access door
Battery replacement description Hot-swappable, user replaceable batteries
LEDS ALARMS & SWITCHES
LED Indicators 3 LEDs indicate line power, battery power and battery low/replace status
Alarms Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating 252
UPS AC suppression response time Instantaneous
EMI / RFI AC noise suppression Yes
PHYSICAL
Installation form factors supported with included accessories Tower
Installation form factors supported with optional accessories Wallmount (use UPSWM - tower mounting kit)
Primary form factor Tower
UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 8.5 x 5.2 x 7
UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 21.6 x 13.3 x 17.8
UPS / Power Module weight (lbs) 12
UPS / Power Module weight (kg) 5.4
UPS Shipping dimensions (height x width x depth / inches) 12 x 8.2 x 10
UPS Shipping dimensions (height x width x depth / cm) 30.5 x 21 x 25.4
Shipping weight (lbs) 13
Shipping weight (kg) 5.9
UPS housing material PVC
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full load) 60.8
Battery mode BTU / hr. (full load) 334.5
COMMUNICATIONS
Communications interface USB (HID enabled)
PowerAlert software Free download from www.tripplite.com
Communications cable USB cable is user supplied
WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time 2-4 milliseconds
Low voltage transfer to battery power (setpoint) 99V (adjustable to 83V via potentiometer)
High voltage transfer to battery power (setpoint) 176 (adjustable to 147 via potentiometer)
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure) Cold-start operation supported
High availability UPS features Hot swappable batteries
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI); ROHS (Reduction of Hazardous Substances)
WARRANTY
Product Warranty Period (U.S., Canada & Puerto Rico) 2 years
Connected Equipment Insurance (U.S., Canada & Puerto Rico) $100,000 connected equipment insurance
