Grow your own way
From 2 to 64 users per location, there’s a TalkSwitch system to fit every small business. TalkSwitch units come in different sizes with hybrid connections, so you can choose the way you communicate. You pick your own mix of networks (traditional and/or VoIP) and phones (analog and/or IP).
Up to four TalkSwitch units can be networked together on your LAN for a maximum capacity of 32 phone lines, 64 extensions and 32 VoIP trunks. You can start with what you need today, and add capacity as you grow. Each TalkSwitch unit includes 10 remote extensions, for a maximum of 40 in a networked system. Each unit also includes a voice mailbox for each local and remote extension, plus 10 general-use mailboxes.
TalkSwitch systems have 9 auto attendants, so you can offer multiple options for your callers. The number of auto attendants is global; it does not increase in networked systems.
Free software updates.
Yes, free. TalkSwitch comes with free user-friendly configuration software, so you can set your system to work the way you want it to. Plus, we’re continually adding features and functionality to our software, and we don’t charge for updates.
Warranty
The TalkSwitch is covered by a limited one-year warranty. Extended warranties are also available in the United States and Canada.
Connections
Analog Extensions: Standard 2-pin RJ-11 ports. Each TalkSwitch unit supports 4 or 8 analog phones or fax machines.
PA Output: 1/8" mono phone jack to connect TalkSwitch to a PA system to announce calls, or mto a local speaker to monitor incoming calls and voicemail.
Audio Input: 1/8" mono phone jack allows connection of standard audio devices (CD players, radio or PC soundcards) for music or messages on hold. TalkSwitch can also play a .wav file stored on the system.
Ethernet Connection: RJ-45 10BaseT Ethernet connection for LAN networking and management.
Memory Card Slot: Each TalkSwitch has 2 hours of built-in voicemail and auto attendant memory, which can be upgraded by up to 9 hours with optional memory cards.
Incoming Telephone Lines: Standard 2-pin RJ-11 ports; support for Caller ID and distinctive ringing. Each TalkSwitch unit can support 2, 4 or 8 incoming lines.
USB Port: Optionally connect to a PC via a USB port for configuration. Ethernet cable and software included. The system does not need to be connected to a PC to function.
Power Source: 120 VAC, 60 Hz — In. 16 VAC, 2.0 A — Out. AC adapter included.
VoIP features
• Embedded SIP server and user agents
• Integrated registrar
• Can use external SIP servers as required
• RTP
• Fax tone detection
• G.711 u-law/A-law, G.726 (32 Kbps), G.729a
• G.168 echo cancellation
• VAD, silence suppression
• Adaptive jitter buffer
• Packet loss concealment
FEATURES
* VoIP and traditional telephone lines
* Auto Attendants
* Voicemail
* Remote Extensions
* External IP Extensions
* Easy set-up
* Expandable
* Analog and IP phones
* Dial-By-Name Directory
* Voicemail to E-mail
* Music on Hold
* Call Cascade
* Ring Groups
* Uniform Call Distribution
* Call Queue
* Automatic Route Selection
* Toll Restriction
* Call Detail Record Logging
* Line Appearance (with TS-9133i and TS-480i phones)
* Multiple Language Prompts
* Call Forward
* Auto Fax Detection
* Call Conference
* Call Back/Call Bridge
* Mode Scheduling
* Call Hold/Transfer/Park
* Call Screening
* Intercom
* Call Pickup
* Distinctive Ring
* Public Announcement
* Remote Management
* LAN capability
* Free Software Upgrades
System
LAN interface: RJ-45 Ethernet (10BaseT)
Memory expansion: 1, 2, 4.5 and 9-hour memory cards
Power-failure line to extension jacks: Extension 4 connects to Line 1
Analog extension interface
Connector type: RJ-11, 2-pin
Trunk type: Loop start
Interface impedance: 600 ohms
Loop range: 0–600 ohms
Hook flash supported: Yes
On-hook voltage: 35 volts
Off-hook loop voltage source: 35 volts
Off-hook loop current: 23 mA to 40 mA
Dial tone level: -2.4 dBm
Ringing voltage: 90 volts RMS
Ringing frequency: 20 Hz – sine wave
Total ringing load: 5 REN
Analog trunks
Connector type: RJ-11, 2-pin
Trunk type: Loop start
Interface impedance: Configurable 600 ohms, 600 complex/ 900 ohms, 900 complex
Ringing impedance: 3,900 ohms
Ringing sensitivity: 45 volts RMS @ 20 Hz
REN: 0.7B
Longitudinal balance: 69 dB
Signal level: -10 dB
Distinctive ring supported: Yes
Caller ID support: FSK, all lines
