Large capacity
Increased reliability & redundancy
True Enterprise grade solution
The Epygi QuadroM32x is a fully featured IP PBX phone system with voicemail, ready to go right out of the box. The M32x really focuses on the IP needs of your business with regards to both SIP trunks and IP telephones.
Right out of the box, the Quadro M32x will support:
- SIP Trunk
- T-1 / E-1
- 32 IP Telephones (we recommend the SNOM phones)
- Fully Featured Voicemail
The QuadroM32x IP PBX was designed for larger businesses with a greater need for IP extensions and SIP trunks. The appliance boosts capacity to as many as sixty concurrent calls and scales to 192 extensions.
Maximum call capacity is achieved using ITSP services and an E1/T1 interface for all local and failover calling (the ability to switch to another system in the event of service interruption). The QuadroM32x includes two FXS ports for connecting standard analog phones, fax machines or similar devices.
Like other Quadro IP PBXs, the QuadroM32x comes with a built-in QoS router for Internet access, a stateful inspection firewall, NAT, DHCP client and server, IPSec and VPN. It can be configured remotely via web browser using a simple GUI.
Conferencing and Automatic Call Distribution are a few of the unique features to this product. Third party integration with Unified Multimedia Communications platforms is another key solution for large businesses.
Software enhancements include an optional integrated 32/64-person conference bridge (enabled with license keys) and programmable ACD (Automatic Call Distribution) (ETA 4Q2008) for call centers. Installation and configuration protocol improvements make larger network installs faster and easier.
Voice Features
Voice Coding G.711, G.726 (16, 24, 32, 40 Kbps), G.729A, iLBC (13,33 kbit/s , 15,2 kbit/s); (ITU-T: G711, G.726, G729 Annex A; RFC 3951 :iLBC; IETF;ITU-T Q.23, Q.24, Bellcore GR.506, GR.181; ITU-T G.168- 2000, 2002; ETS_300659_1,2,3)
NAT traversal (both manually and STUN) VAD, CNG, G.168 echo cancellation.
Bandwidth Requirements
Per call WAN bandwidth requirements for the following codecs
(non encrypted)
G.711 20 msec 84 kbps
G.726-16 20 msec 37 kbps
G.726-24 20 msec 45 kbps
G.726-32 20 msec 52 kbps
G.726-40 20 msec 60 kbps
G.729a 20 msec 29 kbps
iLBC 30 msec 27 kbp
PBX Features
Call blocking,
Forwarding,
Hold,
Transfer Call relay,
Call waiting,
Caller ID Detection
Voice mail
Call park,
Pickup,
Paging,
Intercom
Multilevel auto attendant with Interactive Voice Response (IVR) and VoiceXMLv2 support
Voice mail with SMS notification
Distinctive ringing
Speed dialing
Many extension ringing Receptionist
Call hunting,
Hiding Caller ID
Automated Call back from
Auto Attendant Hold music
Call statistics
Do Not Disturb
Unified messaging 3-way conferencing
Hotline service
T.38 fax, fax relay and clear channel fax
Unified Fax Messaging Busy auto-redial
Directory assistance Dial plans (call routing)
Time of day routng
Call Queue
Voice Mail profile
Automatic Call Distribution
Conference Server
Call Signaling
SIP (RFCs: 3261, 3263, 3265, 3311, 3323, 3324,
3325, 3428, 3515, 3578, 3581, 3725, 3842, 3856, 3863, 3891, 3892, 4028, 4235)
SDP (RFC 2327) RTP (RFCs: 1889, 1890, 2833, 3389, 3550, 3551,
3555, draft-ietf-avt-rf- c2833bis-05, draft-ietf-avt-rtp-ilbc-o5), Fax over IP
(ITU-T: T4, T30, T38, V17, V21, V27 ter, V29).
POTS Signaling
Loop start
CAS Signaling
CAS (MELCAS, ITU, ITU-T2, ITU-T: Q.400, Q.411, Q.421, Q.422, Q.440-Q.442, Q.450-Q.452, Q.454, Q.455, Q.457, Q.458, Q.460-Q.468, Q.470-Q.476
Types: Loop Start, Ground Start; E&M Delay Dial, E&M Wink Start, E&M Immediate Start, E&M FGD R2 DTMF, R2 compelled, R2 non- compelled, R2 compelled with ANI, R2 non-compelled with ANI; R2 Parameters for Brazil and Mexico etc.)
ANSI T1.403.02-199, T1.403.02a-2001
DTMF
In band & out of band signaling support.
Extensions
Up to 400 extensions including FXS phones LAN IP
Phones remote and virtual extensions All extensions can be registered on dif- ferent SIP servers
LAN IP Phones
32 SIP phones by default;
160 additional SIP phones may be added with feature keys
Remote IP extensions may be enabled for each SIP phone
Plug-and-Play with select IP Phone manufactures
System Capacity
Maximum 64 concurrent VoIP calls with external parties
Unlimited station to station calling for IP phones
Premise Connections
2 short-loop FXS ports (RJ11)
2 Ethernet 10/100 BASE T port (RJ45)
Uplink Connection
1 Ethernet 10/100 BASE T (RJ45)
External Storage
Compact Flash
Billing
Radius Client (RFCS: 2865, 2866)
Internet
STUN/NAT traversal (RFC 3489)
IPSec VPN with DES, 3DES amnd AES
encryption in tunnel mode (RFCs: 2402, 2406, 2409). Manual and automatic IKE key support
PPTP VPN
L2TP VPN
Firewall security via:
Intrusion Detection System NAT (Network Address Translation)
Policy and service-based filtering Stateful inspection firewall
DHCP server on the LAN side
DHCP client on the WAN side
DNS server with forwarding functionality
SNTP (Simple Network Time Protocol) server/client for computer clock synchro- nization
PPPoE connection to the ISP with PAP/(MS)CHAP authentication
IP DIFFSERV for QoS
Virtual LAN (VLAN/IEEE 802.1Q)
Mail client to send voice and fax messages as e-mail attachments (.wav and .tif) and system notifications DNS (DYNDNS) support with third party NAT/Router with port forwarding and port translation.
Management
Multilingual WEB interface accessible from LAN and WAN (HTTP/HTTPS)
Password control Remote diagnostics and software upgrade
Auto-provisioning VoIP Carrier
Wizard Download/restore configuration
Legible and editable configuration files
Auto-configuration of IP phones via TFTP and HTTP SNMP
Monitoring and Configuration
Third Party Call Control XML RPC
Reset button with factory reset option
Custom Language Pack
Diagnostics/Testing
LEDs: Busy, Info, Fault, LAN, WAN, Line
E1/T1 diagnostics, Loop settings Remote testing
Physical Dimensions
Rack-mountable devices:
Measurements: 19” x 7.56” x 1.77”
(48.0 x 19.2 x 4.5 cm)
Weight: 2.47 lbs.(1090 g)
Conditions
41°F - 104°F (5°C - 40°C)
operating temperature 41°F - 140°F (5°C - 60°C)
storage temperature 5% - 90% non-condensing humidity
Power Supply
Input 100 - 240 VAC; 50/60 Hz; 0.5 A
Regulatory Compliance
EMC: CFR 47, PART 15, SUBPART B CLASS A
Telecom: TBR12/TBR13; AS/ACIF
