- Digium TE121P Single-Span, Selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card.
- Utilizes Digium's VoiceBusâ„¢ technology (Allows the TE120P to use an industry standard bus-mastering PCI interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts).
- Supports both voice and data modes on its single span. (For example,the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router).
- TE121P works in both 3V and 5V slots by auto detecting the slot's voltage.
- Data Modes:
- Cisco HDLC
- HDLC
- PPP
- Multi-Link PPP
- Frame Relay
- Voice Modes:
- PRI CPE & PRI NET
- NI1
- NI2
- EuroISDN
- 4ESS (AT&T)
- 5ESS (Lucent)
- DMS100
- E&M
- Wink
- Feature Group B
- Feature Group D
- FXO & FXS
- Ground Start
- Loop Start
- Loop Start with Disconnect Detect
Safety Certification and Agency Approvals
Safety:
UL 60950-1:2003, First Edition CSA C22.2 No. 60950-1-03
1st Ed. April 1, 2003 IEC 60950-1:2001
First Edition EN 60950
Note: Canada, Finland, Norway, Sweden and the
United States of America require that equipment
using this product must be located in a
Restricted Access Location (RAL).
Telecom:
FCC Part 68, ANSI/ITA-968-A, Including Amendment A1
and A2 Industry Canada CS-03 AS/ACIF S016: 2001 AS/ACIF S038: 2001
TBR4 November 1995 as amended by TBR4/A1 December
1997 TBR12 December 1993 TBR13 January 1996
EMC:
EN 55022:1998 Class B and 47 CFR Part 15, Subpart B Class B,
Radiated and Conducted EN 55024:1998 / IEC 61000
